Structural, Mechanical, Imaging and in Vitro Evaluation of the Combined Effect of Gd3+ and Dy3+ in the ZrO2-SiO2 Binary System.

Mechanical strength and biocompatibility are considered the main prerequisites for materials in total hip replacement or joint prosthesis. Noninvasive surgical procedures are necessary to monitor the performance of a medical device in vivo after implantation. To this aim, simultaneous Gd3+ and Dy3+ additions to the ZrO2-SiO2 binary system were investigated. The results demonstrate the effective role of Gd3+ and Dy3+ to maintain the structural and mechanical stability of cubic zirconia ( c-ZrO2) up to 1400 °C, through their occupancy of ZrO2 lattice sites. A gradual tetragonal to cubic zirconia ( t-ZrO2 → c-ZrO2) phase transition is also observed that is dependent on the Gd3+ and Dy3+ content in the ZrO2-SiO2. The crystallization of either ZrSiO4 or SiO2 at elevated temperatures is delayed by the enhanced thermal energy consumed by the excess inclusion of Gd3+ and Dy3+ at c-ZrO2 lattice. The addition of Gd3+ and Dy3+ leads to an increase in the density, elastic modulus, hardness, and toughness above that of unmodified ZrO2-SiO2. The multimodal imaging contrast enhancement of the Gd3+ and Dy3+ combinations were revealed through magnetic resonance imaging and computed tomography contrast imaging tests. Biocompatibility of the Gd3+ and Dy3+ dual-doped ZrO2-SiO2 systems was verified through in vitro biological studies.