Enhancing Tribological Performance of Self-Lubricating Composite via Hybrid 3D Printing and In Situ Spraying.

In this work, a self-lubricating composite was manufactured using a novel hybrid 3D printing/in situ spraying process that involved the printing of an acrylonitrile butadiene styrene (ABS) matrix using fused deposition modeling (FDM), along with the in situ spraying of alumina (Al 2 O 3 ) and hexagonal boron nitride (hBN) reinforcements during 3D printing. The results revealed that the addition of the reinforcement induced an extensive formation of micropores throughout the ABS structure. Under tensile-loading conditions, the mechanical strength and cohesive interlayer bonding of the composites were diminished due to the presence of these micropores. However, under tribological conditions, the presence of the Al 2 O 3 and hBN reinforcement improved the frictional resistance of ABS in extreme loading conditions. This improvement in frictional resistance was attributed to the ability of the Al 2 O 3 reinforcement to support the external tribo-load and the shearing-like ability of hBN reinforcement during sliding. Collectively, this work provides novel insights into the possibility of designing tribologically robust ABS components through the addition of in situ-sprayed ceramic and solid-lubricant reinforcements.