A Novel Method Based on Hydrodynamic Cavitation for Improving Nitric Oxide Removal Performance of NaClO 2 .

In the removal of nitric oxide (NO) by sodium chlorite (NaClO 2 ), the NaClO 2 concentration is usually increased, and an alkaline absorbent is added to improve the NO removal efficiency. However, this increases the cost of denitrification. This study is the first to use hydrodynamic cavitation (HC) combined with NaClO 2 for wet denitrification. Under optimal experimental conditions, when 3.0 L of NaClO 2 with a concentration of 1.00 mmol/L was used to treat NO (concentration: 1000 ppmv and flow rate: 1.0 L/min), 100% of nitrogen oxides (NO x ) could be removed in 8.22 min. Furthermore, the NO removal efficiency remained at 100% over the next 6.92 min. Furthermore, the formation of ClO 2 by NaClO 2 is affected by pH. The initial NO x removal efficiency was 84.8-54.8% for initial pH = 4.00-7.00. The initial NO x removal efficiency increases as the initial pH decreases. When the initial pH was 3.50, the initial NO x removal efficiency reached 100% under the synergistic effect of HC. Therefore, this method enhances the oxidation capacity of NaClO 2 through HC, realizes high-efficiency denitrification with low NaClO 2 concentration (1.00 mmol/L), and has better practicability for the treatment of NO x from ships.