Login / Signup

Additive Manufacturing of β-Tricalcium Phosphate Components via Fused Deposition of Ceramics (FDC).

Steffen EsslingerAxel GrebhardtJonas JaegerFrank KernAndreas KillingerChristian BontenRainer Gadow
Published in: Materials (Basel, Switzerland) (2020)
Bone defects introduced by accidents or diseases are very painful for the patient and their treatment leads to high expenses for the healthcare systems. When a bone defect reaches a critical size, the body is not able to restore this defect by itself. In this case a bone graft is required, either an autologous one taken from the patient or an artificial one made of a bioceramic material such as calcium phosphate. In this study β-tricalcium phosphate (β-TCP) was dispersed in a polymer matrix containing poly(lactic acid) (PLA) and poly(ethylene glycole) (PEG). These compounds were extruded to filaments, which were used for 3D printing of cylindrical scaffolds via Fused Deposition of Ceramics (FDC) technique. After shaping, the printed parts were debindered and sintered. The components combined macro- and micropores with a pore size of 1 mm and 0.01 mm, respectively, which are considered beneficial for bone healing. The compressive strength of sintered cylindrical scaffolds exceeded 72 MPa at an open porosity of 35%. The FDC approach seems promising for manufacturing patient specific bioceramic bone grafts.
Keyphrases
  • bone regeneration
  • bone mineral density
  • healthcare
  • bone loss
  • soft tissue
  • postmenopausal women
  • drug delivery
  • tissue engineering
  • health information
  • platelet rich plasma