MOF-Derived Porous Hollow Co3O4@ZnO Cages for High-Performance MEMS Trimethylamine Sensors.
Wenjun YanHuoshu XuMin LingShiyu ZhouTong QiuYanjun DengZhidong ZhaoErpan ZhangPublished in: ACS sensors (2021)
Trimethylamine (TMA) sensors based on metal oxide semiconductors (MOS) have drawn great attention for real-time seafood quality evaluation. However, poor selectivity and baseline drift limit the practical applications of MOS TMA sensors. Engineering core@shell heterojunction structures with accumulation and depletion layers formed at the interface is regarded as an appealing way for enhanced gas sensing performances. Herein, we design porous hollow Co3O4@ZnO cages via a facile ZIF-67@ZIF-8-derived approach for TMA sensors. These sensors demonstrate great TMA resistive sensing performance (linear response at moderate TMA concentrations (<33 ppm)), and a high sensitivity of ∼41 is observed when exposed to 33 ppm TMA, with a response/recovery time of only 3/2 s. This superior performance benefits from the Co3O4@ZnO porous hollow structure with maximum heterojunctions and high surface area. Furthermore, great capacitive TMA sensing with linear sensitivity over the full testing concentration range (0.33-66 ppm) and better baseline stability were investigated. A possible capacitive sensing mechanism of TMA polarization was proposed. For practical usage, a portable sensing prototype based on the Co3O4@ZnO sensor was fabricated, and its satisfactory sensing behavior further confirms the potential for real-time TMA detection.