Login / Signup

The Multifaceted Comparison of Effects of Immobilisation of Waste Imperial Smelting Furnace (ISF) Slag in Calcium Sulfoaluminates (CSA) and a Geopolymer Binder.

Beata Łaźniewska-PiekarczykMonika CzopJan Antoni Rubin
Published in: Materials (Basel, Switzerland) (2024)
Using waste materials as replacements for sand in building materials helps reduce waste and improve the properties and sustainability of the construction materials. Authors proved the possibility of using imperial smelting furnace (ISF) slag granules as a 100% substitute for natural sand in self-compacting (SCC) cement-based mortars of calcium sulfoaluminates (CSA). The study proved that ISF slag's radioactive properties meet this area's requirements. CSA cement eliminates the noted problem in the case of concrete with Portland cement, which is the extended setting of the cement binder. The research findings indicate that using slag to replace sand up to 100% in mortars without grains smaller than 0.125 mm allows high flowability, compaction, low porosity and mechanical parameters. The compressive strength of the CSA cement mortars was about 110 MPa, and more than 140 MPa for geopolymer mortar. Unfortunately, the alkaline pH of a geopolymer causes high leachability of barium and sodium. Thus, the CSA cement is in a more favourable binder to achieve high strength, is environmentally friendly, and is a self-compacting mortar or concrete.
Keyphrases
  • drinking water
  • heavy metals
  • sewage sludge
  • life cycle
  • risk assessment
  • anaerobic digestion