Vapor-Phase Halogenation of Hydrogen-Terminated Silicon(100) Using N -Halogen-succinimides.

The focus of this study was to demonstrate the vapor-phase halogenation of Si(100) and subsequently evaluate the inhibiting ability of the halogenated surfaces toward atomic layer deposition (ALD) of aluminum oxide (Al 2 O 3 ). Hydrogen-terminated silicon ⟨100⟩ (H-Si(100)) was halogenated using N -chlorosuccinimide ( N CS), N -bromosuccinimide (NBS), and N -iodosuccinimide (NIS) in a vacuum-based chemical process. The composition and physical properties of the prepared monolayers were analyzed by using X-ray photoelectron spectroscopy (XPS) and contact angle (CA) goniometry. These measurements confirmed that all three reagents were more effective in halogenating H-Si(100) over OH-Si(100) in the vapor phase. The stability of the modified surfaces in air was also tested, with the chlorinated surface showing the greatest resistance to monolayer degradation and silicon oxide (SiO 2 ) generation within the first 24 h of exposure to air. XPS and atomic force microscopy (AFM) measurements showed that the succinimide-derived Hal-Si(100) surfaces exhibited blocking ability superior to that of H-Si(100), a commonly used ALD resist. This halogenation method provides a dry chemistry alternative for creating halogen-based ALD resists on Si(100) in near-ambient environments.