Accreditation of the handheld 3-dimensional scanner and conventional photo images for area measurement.

Accurate assessment of wound areas is crucial in making therapeutic decisions, as the prognosis and changes in the size of the wound over time play a significant role. An ideal assessment method should possess qualities such as speed, affordability, accuracy, user-friendliness for both patients and healthcare professionals, and suitability for daily clinical practice. This study aims to introduce a handheld 3-dimensional (3D) scanner and evaluate its accuracy in measuring wound areas. Engineers from the Industrial Technology Research Institute in Taiwan developed a handheld 3D scanner with the intention of extending its application to the medical field. A project was conducted to validate the accuracy of this 3D scanner. We utilized a smartphone (Asus ZenFone 2 with a 13-million-pixel rear camera), a digital single-lens reflex digital camera (Nikon, D5000, Tokyo, Japan), and the 3D scanner to repeatedly measure square papers of known size that were affixed to the curved surface of life-size facial mask or medical teaching breast models. The "Image J" software was employed for 2-dimensional image measurements, while the "3D Edit" software was used to assess the "area of interest" on 3D objects. By using square papers with predetermined dimensions, the measurement-associated error rate (ER) could be calculated for each image. Three repeated measurements were performed using the "Image J" software for each square paper. The ERs of the 3D scan images were all below 3%, with an average ER of 1.64% in this study. The close-up mode of the smartphone exhibited the highest ER. It was observed that as the area increased, the ER also increased in the digital single-lens reflex camera group. The extension distortion effect caused by the wide-angle lens on the smartphone may increase the ER. However, the definition of a healthy skin edge may vary, and different algorithms for calculating the measurement area are employed in various 3D measurement software. Therefore, further validation of their accuracy for medical purposes is necessary. Effective communication with software engineers and discussions on meeting clinical requirements are crucial steps in enhancing the functionality of the 3D scanner.