Flexible Switching Pressure Sensors with Fast Response and Less Bending-Sensitive Performance Applied to Pain-Perception-Mimetic Gloves.

A strategy is proposed herein for preparing a flexible switching piezoresistive pressure sensor, which has a bridge-like structure and inverted micropyramids (IMPs) on its lower conductive substrate. The sensor substrates were prepared by injection compression molding (an industrial manufacturing process) using thermoplastic polyurethane (TPU; an industrial grade polymer). The designed bridge-like structure enables the sensor to obtain a pressure threshold. The flexibility of upper and lower TPU substrates allows them to contact quickly when pressed, and so the sensor exhibits a fast response (as short as 2 ms) and can respond to both static force and dynamic force (up to 50 Hz frequency), which are prominent for the sensor made from TPU. The sensor exhibits less bending-sensitive performance, which is attributed to the conformality of the upper and lower substrates and lower strain on the lower substrate with the IMP under bending. The sensor can amplify signal response at the monitoring limit (the relative resistance change is up to 46%). It can achieve a higher sensitivity in different low-pressure ranges by changing the gap of the bridge-like structure. Moreover, the sensor can obviously and steadily respond to an additional very low pressure under preloading and exhibits good durability performance. As the sensor has a pressure threshold similar to the human pain perception process, a pain-perception-mimetic glove that can identify the external mechanical stimuli but reduces the interference of finger bending is prepared, displaying potential applications of the flexible switching sensor in intelligent wearable protectors.