Effect of the Shape of the Confining Boundary and Particle Shape Anisotropy on the Morphology of Desiccation Cracks.

The control of the morphology of desiccation cracks is fascinating not only from the application point of view but also from the rich physics behind it. Here, we present a seemingly simple method to tailor the morphology of desiccation cracks by exploitation of the combined effect of particle shape anisotropy and the shape of the confining boundary. This allows us to make circular, square, and triangular-shaped desiccation cracks in the vicinity of the confining boundaries. As the colloidal dispersion dries in confined wells, a drying front appears at the center of the well. With further evaporation, the drying front recedes toward the boundary from the center of the well. We show that the temporal evolution of the drying front is strongly influenced by the shape of the well. Subsequently, desiccation cracks appear in the penultimate stage of drying, and the morphology of the cracks is governed by the shape of the drying front and hence by the shape of the wells. The spatial evolution of the crack pattern is quantified by estimation of the curvature of the cracks, which suggests that the influence of the confining boundary on crack formation is long-ranged. However, the cracks in the dried deposit consisting of spherical particles remain unaffected by the shape of the well, and the cracks are always radial. We establish a one-to-one correspondence between the shape of the drying front and the morphology of the crack pattern in the final dried deposit of ellipsoids.