Login / Signup

A Comparison of 3D and 2D FE Frictional Heating Models for Long and Variable Applications of Railway Tread Brake.

Michał KuciejPiotr GrzesPiotr Wasilewski
Published in: Materials (Basel, Switzerland) (2020)
The article proposes two 3D and 2D numerical FE models of frictional heating for the estimation of temperature distributions in railway tread brake in 1xBg configuration during repeated long-term braking. The results of computations were compared with the time courses of temperature measured using thermocouples throughout the duration of the tests on a full-scale dynamometer for two different brake shoe materials in combination with a steel wheel. The resulting temperature distributions calculated using the proposed models agreed well with the experimental measurements, and the maximum difference in temperature values does not exceed 20%. It has been proven that 2D FE model can be as efficient as 3D model to estimate the temperature distribution during long-term and variable braking in the considered friction node. The differences in the calculation of the temperature values using these models did not exceed 3%, and the calculation time for the 2D model, compared to the 3D model, was shorter approximately 85 times for the braking cycle lasting 5032 s, and approximately 45 times for the braking cycle lasting 3297 s.
Keyphrases
  • monte carlo
  • mass spectrometry
  • high speed