Experimental and Updated Kinetic Modeling Study of Neopentane Low Temperature Oxidation.

Neopentane is an ideal fuel model to study low-temperature oxidation chemistry. The significant discrepancies between experimental data and simulations using the existing neopentane models indicate that an updated study of neopentane oxidation is needed. In this work, neopentane oxidation experiments are carried out using two jet-stirred reactors (JSRs) at 1 atm, at a residence time of 3 s, and at three different equivalence ratios of 0.5, 0.9, and 1.62. Two different analytical methods (synchrotron vacuum ultraviolet photoionization mass spectrometry and gas chromatography) were used to investigate the species distributions. Numerous oxidation intermediates were detected and quantified, including acetone, 3,3-dimethyloxetane, methacrolein, isobutene, 2-methylpropanal, isobutyric acid, and peroxides, which are valuable for validating the kinetic model describing neopentane oxidation. In the model development, the pressure dependencies of the rate constants for the reaction classes Q̇OOH + O 2 and Q̇OOH decompositions are considered. This addition improves the prediction of the low-temperature oxidation reactivity of neopentane. Another focus of model development is to improve the prediction of carboxylic acids formed during the low-temperature oxidation of neopentane. The detection and identification of isobutyric acid indicates the existence of the Korcek mechanism during neopentane oxidation. Regarding the formation of acetic acid, the reaction channels are considered to be initiated from the reactions of ȮH radical addition to acetaldehyde/acetone. This updated kinetic model is validated extensively against the experimental data in this work and various experimental data available in the literature, including ignition delay times (IDTs) from both shock tubes (STs) and rapid compression machines (RCMs) and JSR speciation data at high temperatures.