Role of the Interface between Ag and ZnO in the Electric Conductivity of Ag Nanoparticle-Embedded ZnO.

The addition of Ag nanoparticles (Ag NPs) with an average size of 30 nm into ZnO increases the electric conductivity up to 1000 times. While a similar increase in the conductivity is observed in a mixture of Ag nanoparticles and Al-doped ZnO (AZO) films, a physical mechanism underlying the change in electric conductivity is not the same for Ag NP-added ZnO and Ag NP-added AZO. In Ag NP-added ZnO, an ohmic junction is formed at the ZnO-Ag interface, and electrons are accumulated in ZnO near the ZnO-Ag interface until electron-rich islands are connected. However, in Ag NP-added AZO, electrons in Ag NPs move to the AZO matrix via thermionic emission and travel through the AZO matrix. This change in electron transport at ZnO-Ag and AZO-Ag interfaces is due to the fact that the work function of ZnO (4.62 eV) is larger than those of Ag (4.24 eV) and AZO (4.15 eV). An increase in Ag NP content in the ZnO matrix leads to the overlap of the electron accumulation regions and forms a percolation path for the electron transport without deteriorating the electron mobility. Hence, the electron concentration increases to 2.4 × 1020/cm3 in the 1.4 vol % Ag NP-added ZnO film. In addition, Ag NPs have a negligible effect on the transmittance, and the best Haacke figure of merit (ΦH) values are 2.86 and 5.18 for ZnO:Ag NP and AZO:Ag NP, respectively.