Micro-Nano-Nanowire Triple Structure-Held PDMS Superhydrophobic Surfaces for Robust Ultra-Long-Term Icephobic Performance.
Changhao ChenZe TianXiao LuoGuochen JiangXinyu HuLizhong WangRui PengHongjun ZhangMinlin ZhongPublished in: ACS applied materials & interfaces (2022)
Anti-icing superhydrophobic surfaces have attracted tremendous interests due to their repellency to water and extremely low ice affinity, whereas the weak durability has been the bottleneck for further applications. Surface durability is especially important in long-term exposure to low-temperature and high-humidity environments. In this study, a robust micro-nano-nanowire triple structure-held PDMS superhydrophobic surface was fabricated via a hybrid process: ultrafast-laser-prepared periodic copper microstructures were chemically oxidized, followed by modification of PDMS. The hedgehog-like surface structure was composed of microcones, densely grown nanowires, and tightly combined PDMS. The capillary force difference in micro-nanostructures drove PDMS solutions to distribute evenly, bonding fragile nanowires to form stronger composite cones. PDMS replaced the commonly used fragile fluorosilanes and protected nanowires from breaking, which endowed the surfaces with higher robustness. The ductile PDMS-nanowire composites possessed higher resiliency than brittle nanowires under a load of 1 mN. The surface kept superhydrophobic and ice-resistant after 15 linear abrasion cycles under 1.2 kPa or 60 icing-deicing cycles under -20 °C or 500 tape peeling cycles. Under a higher pressure of 6.2 kPa, the contact angle (CA) was maintained above 150° until the abrasion distance exceeded 8 m. In addition, the surface exhibited a rare spontaneously optimized performance in the icing-deicing cycles. The ice adhesion strength of the surface reached its lowest value of 12.2 kPa in the 16th cycle. Evolution of surface roughness and morphology were combined to explain its unique U-shaped performance curves, which distinguished its unique degradation process from common surfaces. Thus, this triple-scale superhydrophobic surface showed a long-term anti-icing performance with high deicing robustness and low ice adhesion strength. The proposed nanostructure-facilitated uniform distribution strategy of PDMS is promising in future design of durable superhydrophobic anti-icing surfaces.