Sustainable PET Waste Recycling: Labels from PET Water Bottles Used as a Catalyst for the Chemical Recycling of the Same Bottles.

We report using a waste material, poly(ethylene terephthalate) (PET) water bottle labels, for the chemical recycling of the same PET water bottles. The solid fillers used for the manufacturing of the packaging labels were recovered by thermolysis in an electrical furnace at 600, 800, and 1000 °C with 13.5, 12.0, and 10.4 wt % recovery. Characterization of the solid residue showed the presence of calcium carbonate, calcium oxide, and titanium dioxide, which are typical fillers used for packaging film manufacturing, such as water bottle labels. These solid residues were then used as a catalyst for PET depolymerization by glycolysis, in which the catalyst recovered from bottle labels and shredded PET reacted in the presence of excess ethylene glycol at 200 °C. The reaction mixtures were analyzed for PET conversion and the yield of the bis(2-hydroxyethyl)terephthalate (BHET) monomer as the final product of the glycolysis reaction to determine the efficiency of the catalyst. Our results show that the catalyst prepared at 800 °C (Cat-800) has the best performance and provides a 100% PET conversion with a 95.8% BHET yield with a 1.0 wt % loading in 1.5 h. The catalyst from the PET water bottle labels is nontoxic, readily available, cost-effective, environmentally friendly, and can be used as a model for the self-sufficient chemical recycling of PET via glycolysis.