Login / Signup

Research on Biogas Yield from Macroalgae with Inoculants at Different Organic Loading Rates in a Three-Stage Bioreactor.

Alvydas ZagorskisRegimantas DauknysMantas PranskevičiusOlha Khliestova
Published in: International journal of environmental research and public health (2023)
Macroalgae can be a viable alternative to replace fossil fuels that have a negative impact on the environment. By mixing macroalgae with other substrates, higher quality biogas can be obtained. Such biogas is considered one of the most promising solutions for reducing climate change. In the work, new studies were conducted, during which biogas yield was investigated in a three-stage bioreactor (TSB) during the anaerobic digestion of Cladophora glomerata macroalgae with inoculants from cattle manure and sewage sludge at different organic loading rates (OLR). By choosing the optimal OLR in this way, the goal was to increase the energy potential of biomass. The research was performed at OLRs of 2.87, 4.06, and 8.13 Kg VS/m 3 d. After conducting research, the highest biogas yield was determined when OLR was 2.87 Kg VS/m 3 d. With this OLR, the average biogas yield was 439.0 ± 4.0 L/Kg VS added , and the methane yield was 306.5 ± 9.2 L CH 4 /Kg VS added . After increasing the OLR to 4.06 and 8.13 Kg VS/m 3 d, the yield of biogas and methane decreased by 1.55 times. The higher yield was due to better decomposition of elements C, N, H, and S during the fermentation process when OLR was 2.87 Kg VS/m 3 d. At different OLRs, the methane concentration remained high and varied from 68% to 80%. The highest biomass energy potential with a value of 3.05 kWh/Kg VS added was determined when the OLR was 2.87 Kg VS/m 3 d. This biomass energy potential was determined by the high yield of biogas and methane in TSB.
Keyphrases
  • anaerobic digestion
  • sewage sludge
  • antibiotic resistance genes
  • municipal solid waste
  • climate change
  • human health
  • risk assessment
  • mass spectrometry
  • high resolution
  • case control
  • atomic force microscopy