Multilevel Self-Healing Characteristics of Smart Polymeric Composite Coatings.

Smart polymeric composite coatings demonstrating multilevel self-healing characteristics were developed and characterized. The pH-responsive smart carriers were synthesized by loading halloysite nanotubes (HNTs) with the benzotriazole corrosion inhibitor (BTA) using the vacuum cycling method, referred to as (BTA-loaded HNTs). Similarly, mechanically triggered melamine urea-formaldehyde microcapsules encapsulated with the boiled linseed oil-self-healing agent (LO) denoted as (MUFMCs) having an average size of a ∼120 μm diameter with a wall thickness of ∼1.84 μm were synthesized by the in situ polymerization technique. The newly designed double-layered smart polymeric composite coatings (DLPCs) were developed by mixing 3 wt % BTA-loaded HNTs with epoxy and applying it on the clean steel substrate to form a primer layer. After its complete curing, a top layer of epoxy containing 5 wt % of MUFMCs was deposited on it. For an exact comparison, single-layer polymeric composite coatings (SLPCs) containing 3 wt % BTA-loaded HNTs were also developed. The Fourier transform infrared radiation spectra of MUFMCs and BTA-loaded HNTs indicate the existence of all desired functional groups, confirming the presence of loaded chemical species such as LO and BTA into the smart carriers. Thermogravimetric analysis (TGA) indicates that ∼18% BTA is successfully loaded into HNTs. Quantitative UV-spectroscopic analysis indicates a pH-responsive release of BTA from BTA-loaded HNTs, which is time-dependent, attaining its maximum value of ∼ 90% in an acidic medium after 30 h. Electrochemical impedance spectroscopy analysis conducted in 3.5 wt % NaCl solution at room temperature for different immersion times reveals that SLPC exhibits the maximum charge-transfer resistance (Rct) of 55.47 GΩ cm2 after the 7th day of immersion, and then, a declining trend is observed, reaching 26.6 GΩ cm2 after the 9th day. However, in the case of DLPC, the Rct values show a continuous increment, attaining a maximum value of 82.11 GΩ cm2 after the 9th day of immersion. The improved performance of DLPC can be ascribed to the efficient triggering of the individual carriers in the isolated matrices, resulting in the release of LO and BTA to form individual protective films at the damaged area due to the oxidative polymerization process and triazoles' ability of passive film formation on the substrate, respectively. The tempting self-healing properties of DLPCs justify their decent role for long-term corrosion protection in many industrial applications.