Physicochemical Properties of (La,Sr)CoO 3 Thick Films on Fe-25Cr Steel under Exposure to SOFC Cathode Operating Conditions.

La 0.6 Sr 0.4 CoO 3 (LSC) coatings with a thickness of 50-100 µm were deposited on Fe-25Cr ferritic stainless steel (DIN 50049) via screen printing. The required suspension had been prepared using fine LSC powders synthesised using EDTA gel processes. In its bulk form, the LSC consisted entirely of the rhombohedral phase with space group R-3c , and it exhibited high electrical conductivity (~144 S·cm -1 ). LSC-coated steel was oxidised in air at 1073 K, i.e., under conditions corresponding to SOFC cathode operation, for times of up to 144 h. The in situ electrical resistance of the steel/La 0.6 Sr 0.4 CoO 3 layered system during oxidation was measured. The products formed on the samples after the oxidation reaction resulting from exposure to the corrosive medium were investigated using XRD, SEM-EDS, and TEM-SAD. The microstructural, nanostructural, phase, and chemical analysis of films was performed with a focus on the film/substrate interface. It was determined that the LSC coating interacts with the oxidised steel in the applied conditions, and a multi-layer interfacial zone is formed. Detailed TEM-SAD observations indicated the formation of a main layer consisting of SrCrO 4 , which was the reaction product of (La,Sr)CoO 3 , and the Cr 2 O 3 scale formed on the metal surface. The formation of the SrCrO 4 phase resulted in improved electrical conductivity of the investigated metal/ceramics layered composite material, as demonstrated by the low area-specific resistance values of 5 mΩ·cm 2 , thus making it potentially useful as a SOFC interconnect material operating at the tested temperature. In addition, the evaporation rate of chromium measured for the uncoated steel and the steel/La 0.6 Sr 0.4 CoO 3 layered system likewise indicates that the coating is capable of acting as an effective barrier against the formation of volatile compounds of chromium.