Interplay of Drop Shedding Mechanisms on High Wettability Contrast Biphilic Stripe-Patterned Surfaces.

To improve the rate of DWC, numerous studies have adjusted the distribution of drops through biphilic surface patterning and wettability gradients to control the nucleation and drop shedding rates on the condensing surface, yet the connection between drop shedding mechanisms and surface wettability patterning remains unclear. Moreover, wettability patterning places geometric bounds on the governing forces (i.e., gravity, capillary, and inertia), which drive the droplet shedding mechanisms. Thus, the subsequent influence of droplet distribution along the DWC regions on the shedding mechanisms may not be known a priori . In this study, the area fraction, A DWC , of the DWC and also the DWC region width, L N , were varied between 10 and 50% and 0.5-1.5 mm, respectively, to probe the dominant droplet shedding mechanisms on a high wettability contrast surface (i.e., the contact angle on the DWC was 159 ± 3.4° and the hysteresis 9 ± 3.6°, whereas the FWC was nearly perfectly wetting). Humid air was introduced inside a custom-built chamber with the upright steady-state condensation imaged by both real-time and high-speed imaging techniques. We found that the droplet shedding mechanisms changed with increasing L N where the sliding drop radii are reduced with L N while the jumping drop radii remained unchanged with L N . The maximum drop size for shedding also decreased by 13%, which we attribute to the secondary droplet inertia, which helps gravity overcome the capillary retention force. Lastly, although many studies have probed DWC enhancements via surface wettability patterning, an optimal combination of A DWC and L N provided in this study significantly aids in the improvement of future DWC-based condensers and water collector applications.