Indium Tin Oxide Film Characteristics for Cathodic Stripping Voltammetry.

The combination of conductivity, optical transparency, and wide anodic potential window has driven significant interest in indium tin oxide (ITO) as an electrode material for electrochemical measurements. More recently, ITO has been applied to the detection of trace metals using cathodic stripping voltammetry (CSV), specifically manganese (Mn). However, the optimization of ITO fabrication for a voltammetric method such as CSV is yet to be reported, nor have the microstructural properties of ITO been investigated for CSV. Furthermore, CSV does not require optical transparency, thereby allowing nontransparent substrates to be used for deposition. This enables microfabrication procedures to be expanded and simplified compared to glass or quartz. Combining this with the profound importance of sensitive, selective detection of toxic metal ions in environmentally and biologically relevant samples makes ITO especially attractive. In this work, we report a thorough investigation of ITO deposition and processing on silicon (Si) substrates for CSV analysis using Mn as the model analyte. Several ITO process parameters were examined such as heated deposition and post-process annealing. Each ITO film was characterized using a variety of surface, bulk (X-ray diffraction), and electrochemical measurements. Although each ITO film type showed electrochemical activity, the heated and annealed (HA) ITO fabrication process yielded superior results for Mn CSV; a limit of detection (LOD) of 0.1 ppb (1.8 nM) was obtained. This work exemplifies new applications of ITO as an electrode material while providing a baseline for trace detection of toxic metals and other contaminants amenable to detection by CSV.