Zinc Aluminum Oxide Encapsulation Layers for Perovskite Solar Cells Deposited Using Spatial Atomic Layer Deposition.
Hatameh AsgarimoghaddamQiaoyun ChenFan YeAhmed ShahinBo SongKevin P MusselmanPublished in: Small methods (2023)
An atmospheric-pressure spatial atomic layer deposition system is used to rapidly deposit 60 nm zinc-aluminum oxide (Zn-AlO x ) thin-film-encapsulation layers directly on perovskite solar cells at 130 °C without damaging the temperature-sensitive perovskite and organic materials. Varying the Zn/Al ratio has a significant impact on the structural properties of the films and their moisture barrier performance. The Zn-AlO x films have higher refractive indexes, lower concentrations of OH─ groups, and lower water-vapor transmission rates (WVTR) than AlO x films without zinc. However, as the Zn/Al ratio increases beyond 0.21, excess Zn atoms segregate, leading to an increase in the number of available hydroxyl groups on the surface of the deposited film and a slight increase in the WVTR. The stability of the p-i-n formamidinium methylammonium lead iodide solar cells under standard ISOS-D-3 testing conditions (65 °C and 85% relative humidity) is significantly enhanced by the thin encapsulation layers. The layers with a Zn/Al ratio of 0.21 result in a seven-fold increase the time required for the cells to degrade to 80% of their original efficiency.