Impacts of Groundwater Pumping for Hydraulic Fracturing on Aquifers Overlying the Eagle Ford Shale.

Hydraulic fracturing (HF) events consume high volumes of water over a short time. When groundwater is the source, the additional pumping by Rig/Frack Supply Wells (RFSW) may impose costs on owners of other sector wells (OSWs) by lowering the hydraulic head. The Carrizo-Wilcox Aquifer in south Texas is the main source of water for HF of the Eagle Ford Shale Play (EFS). The objectives are to assess the impacts of groundwater pumping for HF supply on: 1) hydraulic heads in OSWs located nearby an RFSW; and 2) volumetric fluxes between layers of the regional aquifer system compared to a baseline model without the effect of RFSW pumping. The study area spans the footprint of the Eagle Ford Shale (EFS) Play in Texas and extends from 2011 to 2020. The pumping schedules of 2,500 RFSWs were estimated from reported pumped water volumes to supply 22,500 HF events. Median annual drawdowns in OSWs ranged from 0.2 to 6.6 m, whereas 95 th percentile annual drawdowns exceeded 20 m. The magnitudes of drawdown increased from 2011 to 2020. Of the four layers that comprise the Carrizo-Wilcox Aquifer, the upper Wilcox was the most intensively pumped for HF supply. During the peak HF year of 2014, the net flux to the upper Wilcox was 292 Mm 3 compared to the baseline net flux for the same year of 278 Mm 3 - a relative gain of 14 Mm 3 . Pumping for HF supply has the potential to negatively impact nearby OSWs by capturing water from adjacent aquifer layers. This article is protected by copyright. All rights reserved.