Phosphate adsorption on LDHs-biochar composite: Double-layer model for quantifying the contribution of ion exchange and ligand exchange.

The adsorption performance of layered double hydroxides (LDHs) is limited owing to self-aggregation. To avoid this and effectively control the eutrophication of water bodies, biochar (BC) was synthesized, herein, by pyrolyzing waste sheep manure at 500°C, and Ca-Al-LDHs were loaded on the surface via a coprecipitation method to obtain Ca-Al-LDHs-BC(CA) composites with varying LDH contents. The fitted maximum adsorption capacities of the CA-5%, CA-10%, CA-15%, and CA-20% samples (corresponding to samples with 5%, 10%, 15%, and 20% LDHs, respectively) were 10.21, 16.14, 22.40, and 28.47 mg g -1 , which were (when converted into metal proportions) 1.48, 1.23, 1.15, and 1.13 times of that of single hydrotalcite, respectively. The double-layer model was fitted using the Levenberg-Marquardt iterative algorithm, which when combined with the characterization results, confirmed that the adsorption of phosphate ions by CA-BC occurred via the double-layer adsorption mechanism. Two types of direct adsorption were observed: ion exchange, which resulted in first-layer adsorption, and ligand exchange, which resulted in second-layer adsorption, with first-layer adsorption accounting for a higher proportion. This double-layer adsorption mechanism showed that LDHs-BC could achieve higher ligand exchange performance compared to that achieved using only LDHs.