Login / Signup

Lead-Free Perovskite Single Crystal Linear Array Detector for High-Resolution X-Ray Imaging.

Yunxia ZhangJinglu HaoZeqin ZhaoJiacheng PiRuixin ShiXiaojun LiNingyi YuanJianning DingShengzhong Frank LiuYucheng Liu
Published in: Advanced materials (Deerfield Beach, Fla.) (2024)
0D Bi-based 329-type halide perovskite is demonstrated as a promising semiconductor for X-ray detection due to its strong X-ray absorption, superior stability, availability of large single crystals (SCs) and solution processibility at low temperature. However, its low mobility-lifetime product (µτ) limits its further improvement in detection sensitivity. Based on the first-principles calculations, this work designs a new 2D Bi-based 329-type halide perovskite using a mixed-halide-induced structural dimension regulation strategy. By using a continuous supply of a precursor solution, this work successfully grows inch-sized high-quality SCs. These SCs exhibit large µτ product, high resistivity, and low ion migration. The detectors fabricated using the SCs show X-ray detection sensitivity as high as 24,509 µC Gy air -1 cm -2 , short response time of 315 µs, low detection limit of 4.3 nGy s -1 , and superior stability. These properties are the best among all lead-free perovskite detectors and are comparable to those of the best lead-based perovskite detectors. The linear array detector assembled on the SCs for the first time also shows a high spatial resolution of 10.6 lp mm -1 during X-ray imaging. The high performance combined with superior stability of these new 329-type lead-free halide perovskite SCs is expected to promote a new generation of X-ray detection technologies.
Keyphrases