Flame Propagation Characteristics of Syngas-Air in the Hele-Shaw Duct with Different Equivalence Ratios and Ignition Positions.

In this paper, the effects of different ignition positions and equivalence ratios on the explosion characteristics of syngas in a half-open Hele-Shaw duct were investigated. The ignition points are set at distances of 0 and 500 mm from the closed end. Moreover, the research range of equivalence ratio is 0.8-1.2. The experimental results indicate that different ignition positions and equivalence ratios influence the flame front structure and the dynamic characteristics of flame propagation. When the ignition position is at the closed end, the flame front undergoes several typical propagation stages before eventually reaching the open end of the duct. The time required by the flame to reach the open end decreases as the equivalence ratio increases. Meanwhile, when the ignition is in the middle of the duct, the flame simultaneously spreads to the open and closed ends. The time required to reach both sides decreases with the increase in the equivalence ratio. The flame front structure and pressure are primarily affected by the ignition position and the equivalence ratio. At the same ignition position, flame propagation velocity and maximum overpressure increase with the equivalence ratio. The pressure oscillation becomes more intense when the ignition position is close to the open end. At IP 500 , when the equivalence ratio is 0.8, multiple finger-shaped flame fronts emerge, accompanied by high-frequency flame oscillations. This study can provide guidance for the study of the flame propagation characteristics of syngas in millimeter-scale burners.