Monitoring Microalgal Biofilm Growth and Phenol Degradation with Fiber-Optic Sensors.

Simple D-type plastic optical fiber (POF) probes (i.e., sensor, reference, and photochemical probes) were created to accurately monitor the progression and phenol degradation of a Chlorella vulgaris biofilm. The sensor and reference probes were used to monitor the biofilm growth (thickness). The sensor probe, which consisted of a D-shaped POF and Canada balsam doped with GeO2 (CBG) coating, was developed to monitor the biofilm growth and change in the liquid-phase composition and its concentration inside the biofilm. The reference probe, which comprised a D-shaped POF, CBG coating, and glass fiber membrane (to separate the liquids from Chlorella vulgaris), was used to measure the response to changes in the liquid phase. A model was developed to demonstrate the accurate measurement of the biofilm thickness. The photochemical POF probe was coupled with a high-permselectivity phenol polymer membrane to monitor the phenol concentration and analyze the degradation time of 50 mg/L phenol with microalgal biofilms. A fixed relationship was obtained between the biofilm sensor output information and biofilm thickness for a biofilm thickness range of 0-290 μm with a periodic supply of 50 mg/L phenol solution. The highest phenol degradation rate occurred at a biofilm thickness of 191-222 μm. The proposed system can be used to investigate microalgal biomass and can provide a promising avenue for research on renewable resources and pollutant degradation.