Constructing the Polymer Molecules to Regulate the Electrode/Electrolyte Interface to Enhance Lithium-Metal Battery Performance.

Lithium-ion batteries, with high energy density and long cycle life, have become the battery of choice for most vehicles and portable electronic devices; however, energy density, safety and cycle life require further improvements. Single-functional group electrolyte additives are very limited in practical applications, a ternary polymer bifunctional electrolyte additive copolymer (acrylonitrile-butyl hexafluoro methacrylate- poly (ethylene glycol) methacrylate- methyl ether) (PMANHF) was synthesized by free radical polymerization of acrylonitrile, 2, 2, 3, 4, 4, 4-hexafluorobutyl methacrylate and poly (ethylene glycol) methyl ether methacrylate. A series of characterizations show that in Li metal anodes, the preferential reduction of PMANHF is conducive to the formation of a uniform and stable solid electrolyte interphase layer, and Li deposition is uniform and dense. At the NCM811 cathode, a film composed of LiF- and Li 3 N-rich is formed at the cathode-electrolyte interface, mitigating the side reaction at the interface. At 1.0 mA cm -2 , the Li/Li cell can be stabilized for 1000 cycles. In addition, the Li/NCM811 cell can stabilize 200 cycles with a cathode capacity of 153.7 mAh g -1 , with the capacity retention of 89.93 %, at a negative/positive capacity ratio of 2.5. This study brings to light essential ideas for the fabrication of additives for lithium-metal batteries.