Embrittlement Mechanisms of HR3C Pipe Steel at Room Temperature in Ultra-Supercritical Unit.

HR3C steel is an austenitic high-temperature-resistant steel. Because of its good strength and high-temperature performance, it has been widely used in ultra-supercritical power plant boilers. With the increasingly frequent start-up and shutdown of thermal power units, leakages of HR3C steel pipes have occasionally occurred due to the embrittlement of HR3C pipe steel after a long service duration. In this study, the embrittlement mechanisms of HR3C pipe steel are investigated systematically. The mechanical properties of the pipe steel after running for 70,000 h in an ultra-supercritical unit were determined. As a comparison, the pipe steel supplied in the same batch was aged at 700 degrees Celsius for 500 h. The mechanical properties and the micro-precipitation of the aged counterparts were also determined for comparison. The results show that the embrittlement of HR3C pipe steel in service for 70,000 h is obvious. The average impact absorption is only 5.5 J, which is a decrease of 96.7%. It is found that embrittlement of HR3C steel also occurs after 500 h of aging at 700 °C, and the average value of impact absorption energy decreases by 70.4%. The comparison experiment between the in-service pipe steel and the aged pipe steel shows that in the rapid decline stage of the impact toughness of HR3C steel, the M 23 C 6 carbide in the microstructure has a continuous chain distribution in the grain boundary. There were no other precipitated phases observed. The rapid precipitation and aggregation of M 23 C 6 carbides leads to the initial embrittlement of HR3C steel at room temperature. The CRFe-type σ phase was found in the transmission electron microscope (TEM) image of the steel pipe after 70 thousand hours of use. The precipitation of the σ phase further induces the embrittlement of HR3C pipe steel after a long service duration.