Impact of In-Soil Ageing Effect on PLA Printed Parts Tensile Properties.

Material extrusion (MEX), more commonly known as fused deposition modelling (FDM/FFF), is one of the most widely used techniques in polymeric Additive Manufacturing (AM). This technology is increasingly present in fields such as engineering and medicine with polymeric materials, including additives of many types. Polylactic acid polymer (PLA) is one of the most widely used materials currently on the market for MEX technology. In addition to its ease of printing, it is a plastic of natural origin, biodegradable and supplants petroleum derivatives in many applications. However, the effect of ageing on the mechanical properties of PLA are still to be evaluated and understood. The main objective of this work is to investigate the effects of ageing of PLA samples on the tensile properties. To investigate the effect of ageing, the samples were tested periodically after exposure to fertilized soil for a period up to 6 months. In addition, some of the samples were chemically pre-treated to improve the surface quality, and the effect of ageing on the treated and untreated samples was also evaluated. This study showed that ultimate strength decreased with ageing from 46 to 36 MPa (22%), and it increased with treatment time in high percentages (even 40%) depending on the time of immersion in the solvent. However, this effect of the chemical treatment gradually disappeared, with the exception of the surface improvement obtained.