Comparative Study between Sulfurized MoS 2 from Molybdenum and Molybdenum Trioxide Precursors for Thin-Film Device Applications.

Two-dimensional (2D) materials have been studied as an emerging class of nanomaterials owing to their attractive properties in nearly every field of science and technology. Molybdenum disulfide (MoS 2 ) is one of the more promising candidates of these atomically thin 2D materials for its technological potential. The facile synthesis of MoS 2 remains a matter of broad interest. In this study, MoS 2 was synthesized by chemical vapor deposition sulfurization at various temperatures (550 °C, 650 °C, and 750 °C) of either precursor molybdenum metal (Mo) or molybdenum trioxide (MoO 3 ) deposited on silicon/silicon dioxide (Si/SiO 2 ) via e-beam evaporation. Monolayer, bilayer, and few layers sulfurized samples have been grown and verified by Raman, photoluminescence spectroscopy, XRD, XPS, and AFM. MoO 3 sulfurization provided monolayer growth in comparison to Mo sulfurization under the same conditions and precursor thicknesses. Optical microscopy showed the homogeneous nature of grown samples. A main finding of this work is that MoO 3 sulfurization produced higher quality MoS 2 as compared to those grown by an Mo precursor. Device characteristics based on monolayer MoO 3 sulfurized MoS 2- x include nonvolatile resistive switching with I on / I off ≈ 10 4 at a relatively low operating bias of ±1 V. In addition, field-effect transistor characteristics revealed p-type material growth with a carrier mobility ∼ 41 cm 2 V -1 s -1 , which is in contrast to typically observed n-type characteristics.