Influence of e-Beam Irradiation on the Physicochemical Properties of Poly(polyol Succinate-co-Butylene Succinate) Ester Elastomers.
Marta Piątek-HnatKuba BombaJakub PęksińskiAgnieszka KozłowskaJacek G SośnickiTomasz J IdzikDanuta PiwowarskaJolanta JanikPublished in: Materials (Basel, Switzerland) (2020)
The purpose of this research was synthesis and electron beam modification of novel ester elastomers consisting of sugar alcohol-succinic acid block and butylene glycol-succinic acid block. Four different alditols were used in the synthesis-sorbitol, erythritol, xylitol, and glycerol. The materials were irradiated with doses of 50, 100, and 150 kGy in order to determine which dose is the most beneficial. As expected, irradiation of the materials has led to the cross-link density becoming higher and improvement of the mechanical properties. Additionally, the materials were also sterilized in the process. The great advantage of elastomers described in the paper is the fact that they do not need chemical cross-linking agents or sensitizers in order to undergo radiation modification. The following tests were performed on cross-linked poly(polyol succinate-co-butylene succinate) elastomers: quasi-static tensile test, determination of cross-link density, differential scanning calorimetry (DSC), dynamic thermomechanical analysis (DMTA), wettability (water contact angle), and Fourier transform infrared spectroscopy (FTIR). In order to confirm successful synthesis, prepolymers were analyzed by nuclear magnetic resonance spectroscopy (1H NMR and 13C NMR).