Diffusional Features of a Lithium-Sulfur Battery Exploiting Highly Microporous Activated Carbon.

Diffusion processes at the electrode/electrolyte interphase drives the performance of lithium-sulfur batteries, and activated carbon (AC) can remarkably vehicle ions and polysulfide species throughout the two-side liquid/solid region of the interphase. We reveal original findings such as the values of the diffusion coefficient at various states of charge of a Li-S battery using a highly porous AC, its notable dependence on the adopted techniques, and the correlation of the diffusion trend with the reaction mechanism. X-ray photoelectron spectroscopy (XPS) and X-ray energy dispersive spectroscopy (EDS) are used to identify in the carbon derived from bioresidues heteroatoms such as N, S, O and P, which can increase the polarity of the C framework. The transport properties are measured by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic intermittent titration technique (GITT). The study reveals Li + -diffusion coefficient (D Li + ) depending on the technique, and values correlated with the cell state of charge. EIS, CV, and GITT yield a D Li + within 10 -7 -10 -8  cm 2  s -1 , 10 -8 -10 -9  cm 2  s -1 , and 10 -6 -10 -12  cm 2  s -1 , respectively, dropping down at the fully discharged state and increasing upon charge. GITT allows the evaluation of D Li + during the process and evidences the formation of low-conducting media upon discharge. The sulfur composite delivers in a Li-cell a specific capacity ranging from 1300 mAh g -1 at 0.1 C to 700 mAh g -1 at 2C with a S loading of 2 mg cm -2 , and from 1000 to 800 mAh g -1 at 0.2C when the S loading is raised to 6 mg cm -2 .