High-yield fabrication of electromechanical devices based on suspended Ti 3 C 2 T x MXene monolayers.

MXenes, two-dimensional transition metal carbides, nitrides, and carbonitrides, are known for their exceptional electronic and mechanical properties. Yet, the experimental efforts toward the realization of MXene-based nanoelectromechanical systems (NEMS) combining electrical and mechanical functionalities of MXenes at the nanoscale remain very limited. Here, we demonstrate a high-yield fabrication of the electromechanical devices based on individual suspended monolayer MXene flakes. We employed Ti 3 C 2 T x , the most popular MXene material to date, that can be produced as high-quality micrometer-scale monolayer flakes with a high electrical conductivity of over 10 000 S cm -1 and a high effective Young's modulus of about 330 GPa. These Ti 3 C 2 T x flakes can be transferred over prefabricated trenches in a Si/Si 3 N 4 substrate at a high yield, potentially enabling fabrication of hundreds of electromechanical devices based on suspended MXene monolayers. We demonstrate very clean, uniform, and well-stretched membranes with different dimensions, with Ti 3 C 2 T x flakes suspended over trenches with gaps ranging from 200 nm to 2 μm. The resulting Ti 3 C 2 T x monolayer membranes were electrostatically actuated, while their vertical displacement was monitored using a tip of an atomic force microscope (AFM). The devices reliably responded to the electrostatic actuation in ambient conditions over multiple cycles and with different measurement parameters, such as AC frequency, AC voltage amplitude, and AFM tip loading force. The demonstration of the high-yield fabrication of working electromechanical devices based on suspended Ti 3 C 2 T x MXene membranes at the ultimate monolayer limit paves the way for the future exploration of the potential of MXenes for NEMS applications.