Sensitive Discrete Frequency Mid-Infrared Absorption Spectroscopy Using Digitally Referenced Detection.

Broadly tunable mid-infrared (IR) lasers, including quantum cascade lasers (QCL), are an asset for vibrational spectroscopy wherein high-intensity, coherent illumination can target specific spectral bands for rapid, direct chemical detection with microscopic localization. These emerging spectrometers are capable of high measurement throughputs with large detector signals from the high-intensity lasers and fast detection speeds as short as a single laser pulse, challenging the decades old benchmarks of Fourier transform infrared spectroscopy. However, noise in QCL emissions limits the feasible acquisition time for high signal-to-noise ratio (SNR) data. Here, we present an implementation that is broadly compatible with many laser-based spectrometer and microscope designs to address these limitations by leveraging high-speed digitizers and dual detectors to digitally reference each pulse individually. Digitally referenced detection (DRD) is shown to improve measurement sensitivity, with broad spectral indifference, regardless of imbalance due to dissimilarities among system designs or component manufacturers. We incorporated DRD into existing instruments and demonstrated its generalizability: a spectrometer with a 10-fold reduction in spectral noise, a microscope with reduced pixel dwell times to as low as 1 pulse while maintaining SNR normally achieved when operating 8-fold slower, and finally, a spectrometer to measure vibrational circular dichroism (VCD) with a ∼ 4-fold reduction in scan times. The approach not only proves versatile and effective but can also be tailored for specific applications with minimal hardware changes, positioning it as a simple and promising module for spectrometer designs using lasers.