Improving the Flexibility of Ship Propellers Additively Manufactured from High-Density Polyethylene/Long Carbon Fiber Composites by Prepreg Coating.

In efforts to achieve the goal of reducing ship emissions in the fight against climate change, reducing fuel consumption by making ships lighter is stated as one of the solutions. In this study, the possibilities of making composite equivalents of propellers, which are the most complex ship elements and traditionally produced from metal materials, are investigated with the advantages of additive manufacturing, which offers a rapid production opportunity for such forms. In this way, a lighter composite propeller and, therefore, a lighter ship will be achieved, and negative environmental impacts, especially harmful emissions, will be reduced. In the study, a 1/14-scale ship propeller was produced through the material extrusion method of additive manufacturing using an HDPE composite containing long carbon fiber with a 15% weight fraction. An attempt to reduce flexibility with an epoxy-carbon fabric prepreg coating was made, as the flexibility has negative effects on the performance of the produced propeller. The propeller tunnel test showed that the applied carbon fabric epoxy prepreg helped to improve the propeller's performance by decreasing the flexibility of the propeller and reducing the deformation at the tips. At the same time, the propeller weight was decreased by 60% compared to its metal counterparts.