Login / Signup

"Compatibilization" through Elongational Flow Processing of LDPE/PA6 Blends.

Maria Chiara MistrettaMarco MorrealeLuigi BottaManuela CerauloPaolo FontanaFrancesco Paolo La Mantia
Published in: Materials (Basel, Switzerland) (2018)
Polyamide/polyolefin blends have gained attention from the academia and the industry for several years. However, in order to optimize their properties, some drawbacks such as chemical incompatibility must be adequately overcome. This can be done by adding suitable compatibilizers. On the other hand, it is less known that suitable processing techniques may also lead to significant results. In a previous work on a low-density polyethylene/polyamide 6 (LDPE/PA6) blend, we found that the orientation due to elongational flow processing conditions could lead to an unexpected brittle⁻ductile transition. In this work, this phenomenon was further investigated and the attention was mainly focused on the effects that processing can have on the morphology and, as a consequence, on the final properties of a polymer blends. With regard to LDPE/PA6 blend, an important result was found, i.e., the effects on the ductility induced by the elongational flow orientation are similar to those obtained by using an ethylene-glycidyl methacrylate compatibilizer.
Keyphrases
  • working memory
  • atomic force microscopy