Hot-Pressing Method To Prepare Imidazole-Based Zn(II) Metal-Organic Complexes Coatings for Highly Efficient Air Filtration.

Particulate matters (PMs) air pollution has become a serious environmental issue due to its great threat to human health. Herein, metal-organic complexes PBM-Zn1 and PBM-Zn2 coatings (noted as PBM-Zn-Filter) have been produced by the hot-pressing method on various substrates for the first time. Layer-by-layer PBM-Zn-Filters were also obtained through varying hot-pressing cycles. The obtained PBM-Zn-Filters with high robustness show excellent performance in PMs removal. In particular, benefiting from thelarger conjugation system, micropore structure, lower pressure drop, higher electrostatic potential ζ, and electron cloud exposed metal center of PBM-Zn2 (DFT calculations), PBM-Zn2@melamine foam-4 gives the highest removal rates, PM2.5:99.5% ± 1.2% and PM10:99.3% ± 1.1%, and the removal efficiency for capture PM2.5 and PM10 particles in cigarette smoke were both retained at high levels (>95.5%) after 24 h tests. More importantly, a homemade mask is made up by imbedding the PBM-Zn2@melamine foam-4 into a commercial breathing mask, which shows higher removal efficiency, lower pressure drop, smaller thickness, and higher quality factor than two commercial breathing masks, the PMs removal efficiencies for both PM2.5 and PM10 are 99.6% ± 0.5% and 99.4% ± 0.8%, and acceptable air resistance are demonstrated.