Sensitive detection of antidiabetic compounds and one degradation product in wastewater samples by a new SPE-LC-MS/MS method.
Vasile-Ion IancuRoxana-Elena ScutariuFlorentina Laura ChiriacGabriel-Lucian RaduPublished in: Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering (2021)
As environment emerging contaminants of anthropogenic origin, antidiabetic drugs are present in the range of high ng/L to ng/mL in the influent and the effluent of the waste water treatment plant (WWTP). The metformin compound is the most used hypoglycemic agent in the world. The aim of this study was to develop a new analytic method, based on solid phase extraction followed by liquid chromatography coupled with mass spectrometric detector (SPE-LC-MS/MS), for identification and quantification of 5 antidiabetic compounds (glibenclamide/glyburide, glimepiride, metformin, glipizide, guanyl urea, gliclazide) and one degradation product (guanyl urea). The investigated environmental samples were the influent and the effluent of four urbans WWTP's. By validating of the analytical method, it was obtained low LOQ's (0.2-4.5 ng/L), satisfactory recovery rates (53.6-116.8%), and corresponding performance parameters: inter-day precision (4.9-8.4%) and reproducibility (11.3-14.6%). The concentrations of antidiabetics were as follow in influent and effluent: metformin 76-2041ng/L and 2-206ng/L, gliclazide (14.1-42.4 ng/L, and 3.3-19.1), glipizide (7.5-11.2 ng/L and 6.5-10ng/L), guanyl urea (6.2-7.3 and 8.3-21.3 ng/L). The efficiency of elimination of the antidiabetics in WWTP's was maximum for metformin (67.6-98.5%), followed, by gliclazide (72.9-78.2%). The lowest elimination efficiency was calculated for glipizide (10.7-13.3%). The guanyl urea undergoes a formation process (74.5-84.2%) in effluent, from the metformin contained in influent.
Keyphrases
- wastewater treatment
- solid phase extraction
- liquid chromatography
- sensitive detection
- ms ms
- anaerobic digestion
- mass spectrometry
- simultaneous determination
- heavy metals
- liquid chromatography tandem mass spectrometry
- magnetic resonance imaging
- molecularly imprinted
- risk assessment
- drinking water
- atomic force microscopy
- gas chromatography