Modeling Liquids and Resin-Based Dental Composite Materials-A Scoping Review.

Several lubricant materials can be used to model resin-based composites (RBCs) during restorative procedures. Clinically, instruments or brushes are wet with bonding agents (BAs) or modeling liquids (MLs) for sculpturing purposes. However, a knowledge gap exists on their effects on the mechanical properties of RBCs, requiring greater insight. Five databases were searched, including 295 in vitro studies on the use of lubricant materials for modeling RBCs during restorative procedures. Only articles in the English language were included, with no limits on the publication date. The last piece of research was dated 24 March 2022. In total, 16 studies were included in the review process, together with a paper retrieved after screening references. A total of 17 BAs and 7 MLs were investigated. Tensile ( n = 5), flexural strength ( n = 2), water sorption ( n = 2), color stability ( n = 8) and translucency ( n = 3), micro-hardness ( n = 4), roughness ( n = 3), degree of conversion ( n = 3), and monomer elution ( n = 2) tests were carried out. In general, a maximum of 24 h of artificial storage was performed ( n = 13), while four papers tested the specimens immediately. The present review identifies the possibilities and limitations of modeling lubricants used during restorative procedures on the mechanical, surface, and optical properties of RBCs. Clinicians should be aware that sculpturing RBCs with modeling resins might influence the composite surface properties in a way that is material-dependent.