Login / Signup

Effect of Porosity and Heat Treatment on Mechanical Properties of Additive Manufactured CoCrMo Alloys.

Tu-Ngoc LamKuang-Ming ChenCheng-Hao TsaiPei-I TsaiMeng-Huang WuChing-Chi HsuJayant JainE Wen Huang
Published in: Materials (Basel, Switzerland) (2023)
To minimize the stress shielding effect of metallic biomaterials in mimicking bone, the body-centered cubic (bcc) unit cell-based porous CoCrMo alloys with different, designed volume porosities of 20, 40, 60, and 80% were produced via a selective laser melting (SLM) process. A heat treatment process consisting of solution annealing and aging was applied to increase the volume fraction of an ε-hexagonal close-packed (hcp) structure for better mechanical response and stability. In the present study, we investigated the impact of different, designed volume porosities on the compressive mechanical properties in as-built and heat-treated CoCrMo alloys. The elastic modulus and yield strength in both conditions were dramatically decreased with increasing designed volume porosity. The elastic modulus and yield strength of the CoCrMo alloys with a designed volume porosity of 80% exhibited the closest match to those of bone tissue. Different strengthening mechanisms were quantified to determine their contributing roles to the measured yield strength in both conditions. The experimental results of the relative elastic modulus and yield strength were compared to the analytical and simulation modeling analyses. The Gibson-Ashby theoretical model was established to predict the deformation behaviors of the lattice CoCrMo structures.
Keyphrases
  • heat stress
  • high resolution
  • bone mineral density
  • stem cells
  • single cell
  • cell therapy
  • body composition
  • stress induced
  • bone loss
  • single molecule