Nanoscale Wrinkled Cu as a Current Collector for High-Loading Graphite Anode in Solid-State Lithium Batteries.

Solid-state lithium batteries have been intensively studied as part of research activities to develop energy storage systems with high safety and stability characteristics. Despite the advantages of solid-state lithium batteries, their application is currently limited by poor reversible capacity arising from their high resistance. In this study, we significantly improve the reversible capacity of solid-state lithium batteries by lowering the resistance through the introduction of a graphene and wrinkle structure on the surface of the copper (Cu) current collector. This is achieved through a process of chemical vapor deposition (CVD) facilitating graphene-growth synthesis. The modified graphene/wrinkled Cu current collector exhibits a periodic wrinkled pattern 420 nm in width and 22 nm in depth, and we apply it to a graphite composite electrode to obtain an improved areal loading average value of ∼2.5 mg cm-2. The surface-modified Cu current collector is associated with a significant increase in discharge capacity of 347 mAh g-1 at 0.2 C when used with a solid polymer electrolyte. Peel test results show that the observed enhancement is due to the improved strength of adhesion occurring between the graphite composite anode and the Cu current collector, which is attributed to mechanical interlocking. The surface-modified Cu current collector structure effectively reduces resistance by improving adhesion, which subsequently improves the performance of the solid-state lithium batteries. Our study can provide perspective and emphasize the importance of electrode design in achieving enhancements in battery performance.