An Instrument for the Characterization and Calibration of Optical Sensors.

This paper presents the development of a hardware/software system for the characterization of the electronic response of optical (camera) sensors such as matrix and linear color and monochrome Charge Coupled Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS). The electronic response of a sensor is required for inspection purposes. It also allows the design and calibration of the integrating device to achieve the desired performance. The proposed instrument equipment fulfills the most recent European Machine Vision Association (EMVA) 1288 standard ver. 3.1: the spatial non uniformity of the illumination ΔE must be under 3%, and the sensor must achieve an f-number of 8.0 concerning the light source. The following main innovations have achieved this: an Ulbricht sphere providing a uniform light distribution (irradiation) of 99.54%; an innovative illuminator with proper positioning of color Light Emitting Diodes (LEDs) and control electronics; and a flexible C# program to analyze the sensor parameters, namely Quantum Efficiency, Overall System Gain, Temporal Dark Noise, Dark Signal Non Uniformity (DSNU1288), Photo Response Non-Uniformity (PRNU1288), Maximum achievable Signal to Noise Ratio (SNRmax), Absolute sensitivity threshold, Saturation Capacity, Dynamic Range, and Dark Current. This new instrument has allowed a camera manufacturer to design, integrate, and inspect numerous devices and camera models (Necta, Celera, and Aria).