Anchoring Carbon Spheres on Titanium Dioxide Modified Commercial Polyethylene (PE) Separator to Suppress Lithium Dendrites for Lithium Metal Batteries.

Lithium dendrites are easily generated for excessively-solved lithium ions (Li + ) inside the lithium metal batteries, which will lead serious safety issues. In this experiment, carbon spheres (CS) are successfully anchored on TiO 2  (CS@TiO 2 ) in the hydrothermal polymerization, which is filtrated on the commercial PE separator (CS@TiO 2 @PE). The negative charge in CS can suppress random diffusion of anions through electrostatic interactions. Density functional theory (DFT) calculations show that CS contributes to the desolvation of Li + , thereby increasing the migration rate of Li + . Furthermore, TiO 2  exhibits high affinity to liquid electrolytes and acts as a physical barrier to lithium dendrite formation. CS@TiO 2 is a combination of the advantages of CS and TiO 2 . As results, the Li +  transference number of the CS@TiO 2 @PE separator can be promoted to 0.63. The Li||Li cell with the CS@TiO 2 @PE separator exhibits a stable cycle performance for more than 600 h and lower polarization voltage (17 mV) at 1 mA cm -2 . The coulombic efficiency (CE) of the Li||Cu cells employe the CS@TiO 2 @PE separator is 81.63% over 130 cycles. The discharge capacity of LiFePO 4 ||Li cells based on the CS@TiO 2 @PE separator is 1.73 mAh (capacity retention = 91.53% after 260 cycles). Thus, the CS@TiO 2 layer inhibits lithium dendrite formation.