Designing a Highly Stable Slippery Organogel on Q235 Carbon Steel for Inhibiting Microbiologically Influenced Corrosion.

Microbiologically influenced corrosion (MIC) accelerates the corrosion and degradation of metal materials due to the settlement of microorganisms on the surface. However, environmentally friendly and efficient methods to fabricate antifouling and anticorrosion surfaces are still lacking. Inspired by Nepenthes , a slippery liquid-infused porous surface (SLIPS) has been proven to be an efficient way to inhibit settlement of microorganisms on the metal surface and the following MIC due to the existence of a mobile defect-free lubricant layer. However, the stability of the lubricant layer and substrate of the SLIPS prevented its long-term antifouling and anticorrosion application. Herein, a highly stable slippery organogel was fabricated by depositing a homogeneous mixture of PDMS (base and curing agent), silicone oil, triethoxyvinylsilane, and SiO 2 on Q235 and curing in an oven. Triethoxyvinylsilane was not only able to cross-link with the curing agent of PDMS through hydrosilylation but also able to interlink the organogel and Q235 through condensation between the -OH of the metal surface and hydrolyzed siloxane. As a result, the adhesion force between the organogel without triethoxyvinylsilane and the substrate (0.45 MPa) increased to 1.50 MPa for the organogel with triethoxyvinylsilane and SiO 2 . Also, the tensile strength of the organogel without SiO 2 (0.97 MPa) increased to 3.88 MPa for the organogel with 2 wt % SiO 2 because of the high elastic modulus of SiO 2 , which was important to improving its stability under external force. In addition, the organogel showed stable oil distribution and slippery performance after spinning at 4000 rpm for 30 s. Then, the bacterial settlement demonstrated that the organogel could effectively inhibit Pseudoalteromonas sp. settlement on the substrate under both static and dynamic conditions. Finally, an electrochemical test indicated that the MIC could be effectively mitigated by the organogel. This study provides an efficient method to fabricate a highly stable slippery surface on a metal surface for its potential application in mitigating MIC.