Facile Synthesis of Platinum Nanoparticle-Embedded Reduced Graphene Oxide for the Detection of Carbendazim.

In recent years, there has been a significant interest in the advancement of electrochemical sensing platforms to detect pesticides with high sensitivity and selectivity. Current research presents a novel approach utilising platinum nanoparticles (NPs) and reduced graphene oxide deposited on a glassy carbon electrode (Pt-rGO/GCE) for direct electrochemical measurement of carbendazim (CBZ). A straightforward one-step electrodeposition process was applied to prepare the Pt-rGO sensing platform. The incorporation of conductive rGO nanosheets along with distinctive structured Pt NPs significantly enhanced the effective electrode surface area and electron transfer of CBZ. Additionally, when exposed to 50 µM CBZ, Pt-rGO/GCE exhibited a higher current response compared to the bare electrode. Further investigations were performed to analyse and optimise the experimental parameters that could influence pesticide detection. Under the optimised conditions of pH 7 and 5 min of accumulation time, the Pt-rGO/GCE sensor showed a linear concentration detection range from 0.1 µM to 50 µM, with a detection limit of 3.46 nM. The fabricated sensor was successfully employed for CBZ detection in milk and tap water with 98.88% and 98.57% recovery, respectively. The fabricated sensor showed higher sensitivity and reproducibility, thus indicating the potential of this technology in the development of reliable sensors for the detection of CBZ or similar pesticides in forthcoming applications.