Login / Signup

Blue Electroluminescence in SRO-HFCVD Films.

Haydee P MartínezJosé Alberto Luna-LópezRoberto Morales-CaporalJosé F CascoJosé A D HernándezAdan Luna FloresZaira Jocelyn Hernández SimónGabriel MendozaKarim MonfilRaquel RamírezJesús CarrilloJavier Flores-Méndez
Published in: Nanomaterials (Basel, Switzerland) (2021)
In this work, electroluminescence in Metal-Insulator-Semiconductors (MIS) and Metal-Insulator-Metal (MIM)-type structures was studied. These structures were fabricated with single- and double-layer silicon-rich-oxide (SRO) films by means of Hot Filament Chemical Vapor Deposition (HFCVD), gold and indium tin oxide (ITO) were used on silicon and quartz substrates as a back and front contact, respectively. The thickness, refractive indices, and excess silicon of the SRO films were analyzed. The behavior of the MIS and MIM-type structures and the effects of the pristine current-voltage (I-V) curves with high and low conduction states are presented. The structures exhibit different conduction mechanisms as the Ohmic, Poole-Frenkel, Fowler-Nordheim, and Hopping that contribute to carrier transport in the SRO films. These conduction mechanisms are related to the electroluminescence spectra obtained from the MIS and MIM-like structures with SRO films. The electroluminescence present in these structures has shown bright dots in the low current of 36 uA with a voltage of -20 V to -50 V. However, when applied voltages greater than -67 V with 270 uA, a full area with uniform blue light emission is shown.
Keyphrases
  • high resolution
  • room temperature
  • carbon nanotubes
  • light emitting
  • mass spectrometry