Login / Signup

Nanochitin/MXene Composite Coated on Quartz Crystal Microbalance for Humidity Sensing.

Yanqi LiXianhe HuangQiao ChenYao YaoWei Pan
Published in: Nanomaterials (Basel, Switzerland) (2023)
MXenes, as a typical graphene-like material, excels in the realm of humidity sensing owing to its two-dimensional layer structure, high electrical conductivity, tunable chemical properties, hydrophilicity, and large specific surface area. This study proposed a quartz crystal microbalance (QCM) humidity sensor using a nanochitin/Ti 3 C 2 T x MXene composite as a humidity-sensing material. The morphology, nanostructure, and elemental composition of nanochitin, Ti 3 C 2 T x MXene, and nanochitin/Ti 3 C 2 T x MXene composite materials were characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. Compared to the pure Ti 3 C 2 T x MXene-coated QCM humidity sensor, the nanochitin/Ti 3 C 2 T x MXene-coated QCM humidity sensor exhibited a higher sensitivity (20.54 Hz/%RH) in the humidity range of 11.3% to 97.3%. The nanochitin/Ti 3 C 2 T x Mxene-coated QCM humidity sensor also demonstrated low humidity hysteresis (2.12%RH), very fast response/recovery times (4.4/4.1 s), a high quality factor (37 k), and excellent repeatability and sustained stability over time. Eventually, a bimodal exponential kinetics adsorption model was utilized for the analysis of the response mechanism of the nanochitin/Ti 3 C 2 T x MXene composite material-based QCM humidity sensor. This study provides new ideas for optimizing the moisture-sensitive performance of MXene-based QCM humidity sensors.
Keyphrases
  • electron microscopy
  • magnetic resonance
  • magnetic resonance imaging