Login / Signup

In-Doped ZnO Electron Transport Layer for High-Efficiency Ultrathin Flexible Organic Solar Cells.

Xiujun LiuYitong JiZezhou XiaDongyang ZhangYingying ChengXiangda LiuXiaojie RenXiaotong LiuHaoran HuangYanqing ZhuXueyuan YangXiaobin LiaoLong RenWenliang TanZhi JiangJianfeng LuChristopher McNeillWenchao Huang
Published in: Advanced science (Weinheim, Baden-Wurttemberg, Germany) (2024)
Sol-gel processed zinc oxide (ZnO) is one of the most widely used electron transport layers (ETLs) in inverted organic solar cells (OSCs). The high annealing temperature (≈200 °C) required for sintering to ensure a high electron mobility however results in severe damage to flexible substrates. Thus, flexible organic solar cells based on sol-gel processed ZnO exhibit significantly lower efficiency than rigid devices. In this paper, an indium-doping approach is developed to improve the optoelectronic properties of ZnO layers and reduce the required annealing temperature. Inverted OSCs based on In-doped ZnO (IZO) exhibit a higher efficiency than those based on ZnO for a range of different active layer systems. For the PM6:L8-BO system, the efficiency increases from 17.0% for the pristine ZnO-based device to 17.8% for the IZO-based device. The IZO-based device with an active layer of PM6:L8-BO:BTP-eC9 exhibits an even higher efficiency of up to 18.1%. In addition, a 1.2-micrometer-thick inverted ultrathin flexible organic solar cell is fabricated based on the IZO ETL that achieves an efficiency of 17.0% with a power-per-weight ratio of 40.4 W g -1 , which is one of the highest efficiency for ultrathin (less than 10 micrometers) flexible organic solar cells.
Keyphrases