Multicomponent spectrofluorimetric method for the assay of carboxymethylflavin and its hydrolytic products: kinetic applications.

The simultaneous assay of carboxymethylflavin (CMF), an intermediate in the photolysis of riboflavin, and its hydrolytic side-chain cleavage products, lumichrome (LC) (acid solution) and LC and lumiflavin (LF) as well as isoalloxazine ring cleavage products, 1,2-dihydro-1-methyl-2-keto-3-quinoxaline carboxylic acid (KA) and 1,2,3,4-tetrahydro-1-methyl-2,3-dioxo-quinoxaline (DQ) (alkaline solution) has been carried out by a multicomponent spectrofluorimetric method. The method is based on the adjustment of pH of the degraded solutions to 2.0 and extraction of LC and LF with chloroform. The chloroform extract is evaporated to dryness under reduced pressure, the residue dissolved in pH 6.5 citro-phosphate buffer and LC and LF determined at their fluorescence maxima at 478 and 530 nm, respectively. The pH of the aqueous phase is re-adjusted to 6.5 and the solution used for the determination of CMF, KA and DQ at the wavelengths of 530, 443 and 420 nm, respectively. The proposed method has been validated according to ICH guidelines. The calibration curves for CMF and its hydrolytic products are linear in the concentration range of 0.5-5.0 × 10-6  M. The mean recovery ranges from 99.0-102.0% with relative standard deviation (RSD) of 0.19-0.99%. The limit of detection (LOD) and the limit of quantification (LOQ) are in the range of 1.17-1.78 × 10-7  M and 3.55-5.40 × 10-7  M, respectively. The uniformity of molar balance of CMF and degradation products during hydrolytic reactions indicates the accuracy of the proposed method for the spectrofluorimetric assay of the compounds. It has been applied to study the kinetics of hydrolytic reactions of CMF.