Fabrication of solderable intense pulsed light sintered hybrid copper for flexible conductive electrodes.
Yong-Rae JangRobin JeongHak-Sung KimSimon S ParkPublished in: Scientific reports (2021)
Additively printed circuits provide advantages in reduced waste, rapid prototyping, and versatile flexible substrate choices relative to conventional circuit printing. Copper (Cu) based inks along with intense pulsed light (IPL) sintering can be used in additive circuit printing. However, IPL sintered Cu typically suffer from poor solderability due to high roughness and porosity. To address this, hybrid Cu ink which consists of Cu precursor/nanoparticle was formulated to seed Cu species and fill voids in the sintered structure. Nickel (Ni) electroplating was utilized to further improve surface solderability. Simulations were performed at various electroplating conditions and Cu cathode surface roughness using the multi-physics finite element method. By utilizing a mask during IPL sintering, conductivity was induced in exposed regions; this was utilized to achieve selective Ni-electroplating. Surface morphology and cross section analysis of the electrodes were observed through scanning electron microscopy and a 3D optical profilometer. Energy dispersive X-ray spectroscopy analysis was conducted to investigate changes in surface compositions. ASTM D3359 adhesion testing was performed to examine the adhesion between the electrode and substrate. Solder-electrode shear tests were investigated with a tensile tester to observe the shear strength between solder and electrodes. By utilizing Cu precursors and novel multifaceted approach of IPL sintering, a robust and solderable Ni electroplated conductive Cu printed electrode was achieved.
Keyphrases
- metal organic framework
- reduced graphene oxide
- solid state
- aqueous solution
- carbon nanotubes
- electron microscopy
- high resolution
- gold nanoparticles
- heavy metals
- risk assessment
- computed tomography
- finite element
- high glucose
- molecular dynamics
- drug induced
- oxide nanoparticles
- tissue engineering
- staphylococcus aureus
- diabetic rats
- biofilm formation
- atomic force microscopy
- gas chromatography
- genetic diversity